All 2009 and earlier models still have the original warranty: On road 90 days, off road 90 days
Buyer acknowledges that he or she is qualified to operate this product, and is in proper physical condition to participate in such activities. The buyer also agrees to assume all risks when operating or allowing others to operate his or her product. If the buyer does not feel capable of operating the product, he or she must find professional training for such activities.
WARNING!! YOU ACKNOWLEDGE THAT THE USE OF MOTORIZED VEHICLES CAN BE DANGEROUS AND MAY LEAD TO SERIOUS INJURY OR DEATH. These inherent risks and dangers may be caused by buyer's own actions or inactions, the actions or inactions of others participating or not participating in the activity, the condition in which the activity takes place, or the negligence of others. There may be additional risks, including social and economic loss, either known or unknown to Purchaser, not readily foreseeable, and buyer fully accepts and assumes responsibility for all such risks, losses, costs, and damages incurred as a result of Purchaser's participation in riding activities, AS EVEN PROPER OPERATION AND USE OF A MOTORIZED VEHICLE MAY NOT PREVENT SERIOUS INJURY OR DEATH.
BMS MOTORSPORTS will supply, or install in house, new or rebuilt replacement parts in exchange for defective parts, as well as perform in house repairs on defective engines for a period of 1(one) year from the date of purchase at no charge. After 1(one) year, all repair cost are the responsibility of the owner.
BMS MOTORSPORTS will supply, or install in house, new or rebuilt replacement parts in exchange for defective parts for a period of 6(six) months, as well as perform in house repairs on defective engines for a period of 1(one) year from the date of purchase at no charge.
Labor compensation can apply only for full price(not promotion discount or sale price) and only will be a credit on delaer's next order. * see detail for "Flat Rate Guide" in Warranty information section.
All internal lubricated parts, i.e. Pistons, piston rings, piston pins, connecting rods, rod bearings, camshaft, camshaft bearings, timing chain, crankshaft, crankshaft main bearings, oil pump, water pump, valves, valve springs, valve guides, valve seats, valve lifters and valve push rods. Additionally, the engine head and cylinder will only be covered if damage is caused solely as a result of the mechanical failure of one or more internal lubricated components listed above. (Broken gears any damage from outside impacted does not cover warranty)
The Engine case itself will only be covered if the damage caused was solely as a result of the mechanical failure of one or more of the internal lubricated components listed above. (Broken gears any damage from outside impacted does not cover warranty)
All internal lubricated parts contained within the drive axle housing case, i.e. differential, differential gears, drive shaft, drive axles, CV joints, axle bearings, reverse gears and output shafts. The drive axle housing as well as the reverse gearbox housing, if damaged solely as a result of the mechanical failure of one or more or the internal lubricated components contained the drive axle housing will be covered. (Any bent, broken, or damaged by outside impact does not cover warranty)
For carbureted vehicles; Carburetor, vacuum fuel pump, intake manifold, fuel tank and fuel petcock. For fuel injected vehicles; Fuel injectors, fuel pump, fuel rail and fuel pressure regulator.
Stator, stator pickup, magneto, voltage regulator\ rectifier, CDI, starter relay\ starter solenoid, starter motor, coil, distributor assembly and injector relay.
Radiator, radiator cap, thermostat, thermostat housing, temperature indicator switch, cooling fan motors, water pump and water pump housing.
Calipers, drum housings, drum brake linkage, reservoirs, rotors, and lines.
Frame, swing arms, A-arms, steering controls. (Any bent, broken, or damaged by outside impact does not cover warranty)
i.e. flywheel, hydraulic shift linkage, kick start spindle, kick start secondary gear and transmission gears. The transmission case itself will be covered if the damage was solely as a result of mechanical failure of one or more of the internal lubricated components contained within the transmission case. (Improper changing gears without stop completed cause damage internal gears. "No cover warranty")
Initial assembly and preparation must be preformed in accordance with the Consumer Motor Vehicle Delivery Preparation and Inspection Form that is provided by BMS. Additionally, all work must be performed by a professional mechanic (i.e. engine repair shop, motorcycle shop, or local auto repair shop) or an authorized BMS Dealer to assure your vehicle is in good working condition. Upon completion, you must mail in the Consumer Motor Vehicle Delivery Preparation and Inspection Form signed by the technician that performed the service. You will need to provide proof of this service when filing a warranty claim, so (consumers) keep your receipts please. Subject to the limitations stated in this agreement, BMS agrees (at its sole discretion) to replace a covered component if the covered component fails as a result of one or more of the internal lubricated parts within the component stated warranty period from the date of purchase, while the component is being used under the conditions and in the manner specified by its original manufacturer. Keep in mind these units are built for recreational use only. Your claim may be denied under the following circumstances:
Tires, rims, body panels, fuses, forks, shocks, gaskets, light bulbs, seats, CV Boots, oil filter, air filter, fuel filter, filters, clutch wear parts, cables, drive belt, chain, spark plug, any part made from rubber, belts, brake linings and/or pads, batteries, sprockets, external springs, clips, nuts, bolts and fasteners.
All Parts warranty issues must be processed through the dealer where your product was purchased. If you can not reach your dealer, you must produce a copy of your original invoice showing our model number, vehicle identification number and date of purchase on the invoice, as well as a copy of your Consumer Motor Vehicle Delivery Preparation and Inspection Form before we can warranty your product directly. All defective parts must be returned to BMS for inspection and verification of defect. BMS reserves the right to decline any warranty claim based on the criteria listed in the COVERAGE AND LIMITATIONS portion of this warranty.
All towing and/or shipping charges incurred are the responsibility of the customer.
If the components are repaired under the terms of this agreement, they will be repaired or replaced with component parts of like kind and quality.
BMS does not reimburse any labor cost. However BMS does provide free in house labor on defective motors and installation of defective parts that are still under their specified warranty period.
If your product is still under warranty, you must contact our office to obtain an RMA number in order to return any part for exchange, or engine for repair. In most cases, BMS will cover the shipping charge to get the defective part back to our location in the City of Industry. We will pay return shipping to you unless it is determined your part was abused, misused or damaged in any way other than a manufacturers defect. Your dealer may handle the parts exchange for you at no expense, however the option to do so is that of the dealers and we have no control over our dealers in house parts exchange policies.
Customer is to pay for parts, S&H both ways.
In all cases you must send us the part that needs to be replaced. Failure to do so may result in you getting the wrong part. We are not responsible for wrong parts sent if we do not have your part to exchange and verify correct part numbers.
The following is our general shipping policy. See above for specifics of warranty shipping.
THIS WARRANTY IS NOT TRANSFERABLE.
THERE ARE NO AGREEMENTS OR WARRANTIES, EXPRESSED OR IMPLIED INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE STATED IN THIS AGREEMENT. BMS SHALL NOT BE RESPONSIBLE FOR THE PAYMENT OF DAMAGES, OTHER THAN THE SUMS SPECIFIED IN THIS AGREEMENT AND LIMITED WARRANTY, FOR INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGE ARISING FROM INJURY, LOSS OF USE, LOSS OF TIME, RENTAL VEHICLES, PROFITS, OR INCOME TO THE CUSTOMER AS A RESULT OF A FAILURE OF ANY COMPONENT OR PART.
There are no other agreements between the parties with regards to the components purchased except as stated in this agreement & limited warranty.
BMS reserves the right to inspect the defective part before replacing it. In some cases BMS will require the customer to send in the defective part for inspection before an exchange can be made. The inspection process could take from 2-4 business days after its arrival to the designated inspection office. BMS will decide if the part in question is defective or otherwise.
It is the responsibility of the buyer, dealer and distributor and/or end user, and not BMS, to ascertain, and obey, all applicable local, state, federal and international laws in regard to the possession, and use, of any item purchased from BMS. All equipment is sold subject to public law and any local, state or federal ordinances or international law. Dealers and end users must consult their local, state & county laws before ordering or purchasing products made or distributed by BMS. Dealer/Distributor agrees that absolutely no sales of any of our motorized products will be to minors. By placing an order, the buyer represents that the products ordered will be used in a lawful manner and that he/she is of legal age. BMS will not be held liable for the misuse of any product purchased from us or any of our distributors & dealers.
Purchaser hereby certifies that He/She is over 18 years of age. Purchaser has carefully read the foregoing and acknowledges that purchaser understands and agrees to all of the above terms and conditions. Purchaser has had the opportunity to ask any and all questions regarding this agreement and the effect of the same. Purchaser is aware that by ordering and sending payments for any item(s), purchaser assumes all risks and waives and releases certain substantial rights that the purchaser may have or posses. Purchaser therefore releases all liability and waives any and all rights the purchaser may have in regards to purchases made of product directly or indirectly from BMS.
This Agreement shall be effective and binding upon my agents and personal representatives.
All parts and engines sent in for exchange should have there assigned RMA number clearly listed on the outside of the package, and should be sent to:
18689 ARENTH AVE.
CITY OF INDUSTRY, CA 91748
ATTN: PARTS DEPARTMENT
Imported and distributed by BMS MOTORSPORTS, INC.
BMS Motorsports promotes safe and responsible riding. We recommend that you take the time to read over these warnings in addition to your owner's manual, and always ride responsibly. The following are a list of suggestions for safe on road, and off road operation of your new BMS vehicle.
We at BMS Motorsports are in no way liable for any accident, injury or death due to the negligence of the operator, or the actions of others.
YOUR INSURANCE POLICY MAY NOT PROVIDE COVERAGE FOR ACCIDENTS OR INJURIES RESULTING FROM YOUR VOLUNTARY INVOLVEMENT IN ANY RECREATIONAL MOTORVEHICLE ACTIVITIES. TO DETERMINE IF COVERAGE IS PROVIDED, PLEASE CONTACT YOUR INSURANCE COMPANY OR AGENT FOR DETAILS.
YOUR STANDARD AUTO INSURANCE MAY NOT COVER ANY TYPE OF ON ROAD MOTORIZED VEHICLE. BE SURE TO CHECK WITH YOUR AUTO INSURANCE BROKER FOR DETAILS.
When it comes to buying a powersports vehicle, we know you have a lot of choices. Like the automobile industry, the powersports industry is flooded with brands all making claims that they are “the best”, “the biggest”, “the fastest” or “the most powerful”. Many people who go out looking for “the best”, “the biggest”, “the fastest” or “the most powerful” soon realize the cost to have such niceties is simply out of reach.
Powersport manufacturers continue to vie for consumer mindshare and dollars by developing compelling new models engineered to drive sales and profits. As a smart shopper, the key is to look beyond the hype to the virtues and features that matter most to you and ensure you’re buying a product that truly meets your specific needs and excels based on real-world tests, rather than merely perceptions or empty marketing slogans.
What most people look for in a powersports vehicle is the best deal, a perfect balance of everything they are looking for and at a price that they can afford.
At BMS we strive to make every product we sell the best it can possibly be at a price you can afford. Finding the balance between quality and price is what gives you value. You want the best deal you can get without sacrificing quality, safety or performance.
What you want is “more bang for your buck”.
All of the products we distribute must meet important quality standards that are both regulated by the government and that which we self impose. Not only are our products tested by federally regulated laboratories but we also take them out and do real-world tests ourselves. Products that don’t meet our stringent criteria simply don’t make it to our dealers showrooms. As little as 10 years ago quality was not even a word that could be uttered when discussing China made vehicles and in some cases that is still true today. Many brands have come and gone but one brand is still making waves in the vehicle industry pond and that brand is BMS.
When it comes to service after the sale, no one in the China powersports industry compares to BMS, NO ONE! Our dedicated support center is staffed by seasoned professionals who work closely with our parts department to make certain that each product lives up to your expectations. All BMS products are backed by our 1 year limited warranty*. With hundreds of dealerships and service centers nationwide, rest assured in the rare case that you may have an issue, you will be back up and riding in no time.
Finding the balance between price, quality and the features you want is not easy and we recognize this important fact. At BMS we monitor the market very closely to make certain that our products meet the demands of the most discerning consumer. We also work directly with each manufacturer we partner with to make certain that each component part of the products we make or distribute meet or exceed industry performance standards. We then work on bringing these products to you with the quality you expect, while at a price you can afford.
We also make it a point to create products that have standard features which are normally only options on competitors products. We invite you to directly compare our products with any competitor “feature by feature” and then finally compare our price. As you will soon find out, BMS is the best value in the market today, PERIOD.
BMS is not the most expensive powersports supplier and we certainly are not the cheapest. What we feel we have is a perfect balance between offering a product that performs as expected and at a price that appreciated. Our management team, tech support and service team are all avid riders ourselves. We actually ride what we sell and simply put, if we don’t like it, we don’t sell it.
* See warranty for details