All 2009 and earlier models still have the original warranty: On road 90 days, off road 90 days
Buyer acknowledges that he or she is qualified to operate this product, and is in proper physical condition to participate in such activities. The buyer also agrees to assume all risks when operating or allowing others to operate his or her product. If the buyer does not feel capable of operating the product, he or she must find professional training for such activities.
WARNING!! YOU ACKNOWLEDGE THAT THE USE OF MOTORIZED VEHICLES CAN BE DANGEROUS AND MAY LEAD TO SERIOUS INJURY OR DEATH. These inherent risks and dangers may be caused by buyer's own actions or inactions, the actions or inactions of others participating or not participating in the activity, the condition in which the activity takes place, or the negligence of others. There may be additional risks, including social and economic loss, either known or unknown to Purchaser, not readily foreseeable, and buyer fully accepts and assumes responsibility for all such risks, losses, costs, and damages incurred as a result of Purchaser's participation in riding activities, AS EVEN PROPER OPERATION AND USE OF A MOTORIZED VEHICLE MAY NOT PREVENT SERIOUS INJURY OR DEATH.
BMS MOTORSPORTS will supply, or install in house, new or rebuilt replacement parts in exchange for defective parts, as well as perform in house repairs on defective engines for a period of 1(one) year from the date of purchase at no charge. After 1(one) year, all repair cost are the responsibility of the owner.
BMS MOTORSPORTS will supply, or install in house, new or rebuilt replacement parts in exchange for defective parts for a period of 6(six) months, as well as perform in house repairs on defective engines for a period of 1(one) year from the date of purchase at no charge.
Labor compensation can apply only for full price(not promotion discount or sale price) and only will be a credit on delaer's next order. * see detail for "Flat Rate Guide" in Warranty information section.
All internal lubricated parts, i.e. Pistons, piston rings, piston pins, connecting rods, rod bearings, camshaft, camshaft bearings, timing chain, crankshaft, crankshaft main bearings, oil pump, water pump, valves, valve springs, valve guides, valve seats, valve lifters and valve push rods. Additionally, the engine head and cylinder will only be covered if damage is caused solely as a result of the mechanical failure of one or more internal lubricated components listed above. (Broken gears any damage from outside impacted does not cover warranty)
The Engine case itself will only be covered if the damage caused was solely as a result of the mechanical failure of one or more of the internal lubricated components listed above. (Broken gears any damage from outside impacted does not cover warranty)
All internal lubricated parts contained within the drive axle housing case, i.e. differential, differential gears, drive shaft, drive axles, CV joints, axle bearings, reverse gears and output shafts. The drive axle housing as well as the reverse gearbox housing, if damaged solely as a result of the mechanical failure of one or more or the internal lubricated components contained the drive axle housing will be covered. (Any bent, broken, or damaged by outside impact does not cover warranty)
For carbureted vehicles; Carburetor, vacuum fuel pump, intake manifold, fuel tank and fuel petcock. For fuel injected vehicles; Fuel injectors, fuel pump, fuel rail and fuel pressure regulator.
Stator, stator pickup, magneto, voltage regulator\ rectifier, CDI, starter relay\ starter solenoid, starter motor, coil, distributor assembly and injector relay.
Radiator, radiator cap, thermostat, thermostat housing, temperature indicator switch, cooling fan motors, water pump and water pump housing.
Calipers, drum housings, drum brake linkage, reservoirs, rotors, and lines.
Frame, swing arms, A-arms, steering controls. (Any bent, broken, or damaged by outside impact does not cover warranty)
i.e. flywheel, hydraulic shift linkage, kick start spindle, kick start secondary gear and transmission gears. The transmission case itself will be covered if the damage was solely as a result of mechanical failure of one or more of the internal lubricated components contained within the transmission case. (Improper changing gears without stop completed cause damage internal gears. "No cover warranty")
Initial assembly and preparation must be preformed in accordance with the Consumer Motor Vehicle Delivery Preparation and Inspection Form that is provided by BMS. Additionally, all work must be performed by a professional mechanic (i.e. engine repair shop, motorcycle shop, or local auto repair shop) or an authorized BMS Dealer to assure your vehicle is in good working condition. Upon completion, you must mail in the Consumer Motor Vehicle Delivery Preparation and Inspection Form signed by the technician that performed the service. You will need to provide proof of this service when filing a warranty claim, so (consumers) keep your receipts please. Subject to the limitations stated in this agreement, BMS agrees (at its sole discretion) to replace a covered component if the covered component fails as a result of one or more of the internal lubricated parts within the component stated warranty period from the date of purchase, while the component is being used under the conditions and in the manner specified by its original manufacturer. Keep in mind these units are built for recreational use only. Your claim may be denied under the following circumstances:
Tires, rims, body panels, fuses, forks, shocks, gaskets, light bulbs, seats, CV Boots, oil filter, air filter, fuel filter, filters, clutch wear parts, cables, drive belt, chain, spark plug, any part made from rubber, belts, brake linings and/or pads, batteries, sprockets, external springs, clips, nuts, bolts and fasteners.
All Parts warranty issues must be processed through the dealer where your product was purchased. If you can not reach your dealer, you must produce a copy of your original invoice showing our model number, vehicle identification number and date of purchase on the invoice, as well as a copy of your Consumer Motor Vehicle Delivery Preparation and Inspection Form before we can warranty your product directly. All defective parts must be returned to BMS for inspection and verification of defect. BMS reserves the right to decline any warranty claim based on the criteria listed in the COVERAGE AND LIMITATIONS portion of this warranty.
All towing and/or shipping charges incurred are the responsibility of the customer.
If the components are repaired under the terms of this agreement, they will be repaired or replaced with component parts of like kind and quality.
BMS does not reimburse any labor cost. However BMS does provide free in house labor on defective motors and installation of defective parts that are still under their specified warranty period.
If your product is still under warranty, you must contact our office to obtain an RMA number in order to return any part for exchange, or engine for repair. In most cases, BMS will cover the shipping charge to get the defective part back to our location in the City of Industry. We will pay return shipping to you unless it is determined your part was abused, misused or damaged in any way other than a manufacturers defect. Your dealer may handle the parts exchange for you at no expense, however the option to do so is that of the dealers and we have no control over our dealers in house parts exchange policies.
Customer is to pay for parts, S&H both ways.
In all cases you must send us the part that needs to be replaced. Failure to do so may result in you getting the wrong part. We are not responsible for wrong parts sent if we do not have your part to exchange and verify correct part numbers.
The following is our general shipping policy. See above for specifics of warranty shipping.
THIS WARRANTY IS NOT TRANSFERABLE.
THERE ARE NO AGREEMENTS OR WARRANTIES, EXPRESSED OR IMPLIED INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE STATED IN THIS AGREEMENT. BMS SHALL NOT BE RESPONSIBLE FOR THE PAYMENT OF DAMAGES, OTHER THAN THE SUMS SPECIFIED IN THIS AGREEMENT AND LIMITED WARRANTY, FOR INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGE ARISING FROM INJURY, LOSS OF USE, LOSS OF TIME, RENTAL VEHICLES, PROFITS, OR INCOME TO THE CUSTOMER AS A RESULT OF A FAILURE OF ANY COMPONENT OR PART.
There are no other agreements between the parties with regards to the components purchased except as stated in this agreement & limited warranty.
BMS reserves the right to inspect the defective part before replacing it. In some cases BMS will require the customer to send in the defective part for inspection before an exchange can be made. The inspection process could take from 2-4 business days after its arrival to the designated inspection office. BMS will decide if the part in question is defective or otherwise.
It is the responsibility of the buyer, dealer and distributor and/or end user, and not BMS, to ascertain, and obey, all applicable local, state, federal and international laws in regard to the possession, and use, of any item purchased from BMS. All equipment is sold subject to public law and any local, state or federal ordinances or international law. Dealers and end users must consult their local, state & county laws before ordering or purchasing products made or distributed by BMS. Dealer/Distributor agrees that absolutely no sales of any of our motorized products will be to minors. By placing an order, the buyer represents that the products ordered will be used in a lawful manner and that he/she is of legal age. BMS will not be held liable for the misuse of any product purchased from us or any of our distributors & dealers.
Purchaser hereby certifies that He/She is over 18 years of age. Purchaser has carefully read the foregoing and acknowledges that purchaser understands and agrees to all of the above terms and conditions. Purchaser has had the opportunity to ask any and all questions regarding this agreement and the effect of the same. Purchaser is aware that by ordering and sending payments for any item(s), purchaser assumes all risks and waives and releases certain substantial rights that the purchaser may have or posses. Purchaser therefore releases all liability and waives any and all rights the purchaser may have in regards to purchases made of product directly or indirectly from BMS.
This Agreement shall be effective and binding upon my agents and personal representatives.
All parts and engines sent in for exchange should have there assigned RMA number clearly listed on the outside of the package, and should be sent to:
1201 JELLICK AVE.
CITY OF INDUSTRY, CA 91748
ATTN: PARTS DEPARTMENT
Imported and distributed by BMS MOTORSPORTS, INC.
BMS Motorsports promotes safe and responsible riding. We recommend that you take the time to read over these warnings in addition to your owner's manual, and always ride responsibly. The following are a list of suggestions for safe on road, and off road operation of your new BMS vehicle.
We at BMS Motorsports are in no way liable for any accident, injury or death due to the negligence of the operator, or the actions of others.
YOUR INSURANCE POLICY MAY NOT PROVIDE COVERAGE FOR ACCIDENTS OR INJURIES RESULTING FROM YOUR VOLUNTARY INVOLVEMENT IN ANY RECREATIONAL MOTORVEHICLE ACTIVITIES. TO DETERMINE IF COVERAGE IS PROVIDED, PLEASE CONTACT YOUR INSURANCE COMPANY OR AGENT FOR DETAILS.
YOUR STANDARD AUTO INSURANCE MAY NOT COVER ANY TYPE OF ON ROAD MOTORIZED VEHICLE. BE SURE TO CHECK WITH YOUR AUTO INSURANCE BROKER FOR DETAILS.
BMS has dedicated it’s time and resources in supplying our customers with the highest quality off-road and on-road motorcycles and scooter available in the Chinese market today.
Our business philosophy is based on one very simple point, QUALITY. Unlike other business who focus only on getting the cheapest price. We are committed to providing our customers with a great overall experience in every aspect of our service High Quality Products, High Quality Customer Service, and High Quality Parts Support. Whether that is in sales, after sale customer’s support, or customer service, we’re confident that your experience with us will leave you feeling comfortable in knowing that you found a great deal.
Here at BMS our corporate philosophy has always reflected quality concern. First of all, we don’t carry poor Chinese products that only carry an attractive price. We know that our dealers would have a much easier time selling them, but what about the damage to their reputation and the added customer’s frustration, with a cheap but poorly made product. Look closely and not only will you see, but you will also feel the BMS philosophy. The Proof is In the Product.
Innovative design has been a BMS hallmark since day one. Today your new BMS stands at the forefront of the Chinese motorcycle industry. Our strong relationship and communication with the manufacturer enhances our products and allows us eliminate old fashion design and equipment. Compare BMS to any of the other products that are out there in the Chinese market today. Here at BMS our customers do not need to spend more to get quality products that will stand the test of time and be at the forefront of technology and design. That is a BMS goal!
The price is one of the most attractive, and important elements in sales. The price range in the Chinese market varies too much. For example if you are shopping for a 150cc battery, you will find a variety of prices depending on the supplier If you buy that lower prices battery, you will be saving money of course, but at the cost of quality. Here at BMS we require our factory to equip our products with hi-quality parts. How can we compete in the main stream market, along with those low mainstream prices, as well as compete with other Chinese importers.
By reducing our profit range, we BMS guarantee to provide you with high-end quality products at an affordable price, compared to our Chinese competitors.
Recently, the Chinese motorcycle industry has been plagued by problems. So many importers and distributors try to sell their products on their own by means of retail, or internet sales, but how many of these businesses are still standing. Here at BMS our marketing philosophy is simple “We don’t sell to the public.” Here at BMS we safeguard our dealers territory, we work hard to promote our dealers so that both they and BMS reach our goals together.